經歷：

• （92.2-迄今）龍華科技大學 副教授 兼貴重儀器中心 主任

• （89.8-92.1） 親民工商專科學校 助理教授

• （89.4-91.3） 日本 秋田大學 工學部 客座研究員

任教課程：光電工程概論、科技與生活、電子顯微鏡技術、科技與生活

研究領域：金屬材料、材料強度、電子顯微鏡

研究成果

1. 期刊論文

   • Chung-Ming Liu,Chin-Sung Chen, Che-Tong Lin, Sheng-Yang Lee, Keng-Liang Ou, “Aluminum nitride thin film for stress biosening application” , ECS Transactions 2006 (in press, accepted date 2006/07/28)【SCI】

   • Chung-Ming Liu, Che-Tong Lin, Chang-Chih Chen, Chin-Sung Chen, Keng-Liang Ou, “Effect of nano-titanium hydride on formation of multi-nanoporous TiO2 film on Ti”, Applied Surface Science, 2006 (in press, accepted date 2006/07/29)【SCI】

   • T. H. Ko, C.M. Liu, Y. Matsuo, S. Ono, S. Teii, “Numerical and experimental stigation on the thermofluid fields induced by a pen-like atmosphermal plasma torch”, International Journal of Thermal Science, 45, 2006, P681~690【SCI】

   • Jeou-Long Lee, Chung-Ming. Liu, Kuen Ting, Wei-Kung Cheng, Takayoshi Tsuchida, Kenichi Hiramatsu, Shigeru Ono and Shinriki Teii, “The Modification of Carbon Included Polyethylene Surface by Plasma Treatment for Metallizing Using a Low Pressure RF Discharge Plasma”, J. Adv. Oxid Technol., Vol.8, No.1, 2005, p71~75【SCI】

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1998,70,11,高Cr白鑄鐵之高溫壓縮強度，鑄造工學會，P.793-799。

   • Chungming Liu, Setsuo Aso, Shoji Goto, Yoshinari Komatsu Mechanical, 1999, Vol.7, No.2, Properties of Chromium White Cast Irons at High Temperatures, Int. J. of The Soc. Of Mat. Eng. For Resources. P.350~358.

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1999,Vol.12,No.1/2，單方向凝固之Fe-25%Cr-C三元系共晶合金之機械性質，日本素材物性雜誌,P.60-71。

   • Setsuo Aso, Shoji Goto, Yoshinari Komatsu, Wu Liu, Chungming Liu, 1999, Slurry Erosion Behavior Of Fe-15mass%/25mass%Cr-C-B Eutectic Alloys, Wear 233~235 P.160~167. 【SCI】

   • Setsuo Aso, Shoji Goto, Yoshinari Komatsu, Chungming Liu, October, 1999，The effect of solidification conditions on phase transformation of iron matrix of Fe-25mass%Cr-C-B alloys, Int. J. Cast Metals Res., 1999, 11,P. 285~290. (The SPCI6’ Birmingham, Alabama, USA.)

2. 研討會論文

   • C. M. Liu, T. L. sung, Y. C. Huang, C. C. Chan, K. K. Ting, S. Teii, “Decomposition of Waste Plastics to Form Various Materials Using RF Discharge H2O plasma”, 2006Taiwan-Japan Bilateral Technology Interchange Project, The Workshop on the Applications of Plasma to Green Environmental Technology, Taoyuan, Taiwan, December 11~13, 2006

   • C. M. Liu, T. L. sung, “Glow Discharge plasma Treatment Enhances Formaton of a Bioactive Layer on Titanium Alloy”, 2006Taiwan-Japan Bilateral Technology Interchange Project, The Workshop on the Applications of Plasma to Green Environmental Technology, Taoyuan, Taiwan, December 11~13, 2006

     kungen Teii, Koji Takeguchi, Tomohiro Ikeda, Chung-Ming Liu, Kuen Ting, “Effect of deposition temperature on structural and electrical properties of nitrogen-doped nanocrystalline diamond films propared by plasma-enhanced che,ical vapor deposition”, The Papers of Joint Technical Meeting on Plasma Scienceand

   • Technology and Electrical Discharges, IEE Japan, Nov., 10~11, 2006, Ehime, Japan, P.1~5

   • C. M. Liu, Y. C. Huang, K. Ting and S. Teii, “Synthesis of Various Materials from Decomposition of Waste Plastics using the RF Discharge Plasma”, The Papers of Joint Technical Meeting on Plasma Scienceand Technology and Electrical Discharges, IEE Japan, Nov., 10~11, 2006, Ehime, Japan, P.25~28

   • C. M. Liu, T. L. Sung, Y. C. Huang, C. C. Chan, K. Ting, S. Teii, “Decomposition of Waste Plastics by RF Discharge H2O Plasma”, The 4th Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Douliou, Yunlin, Taiwan, December 12~14, 2005, P.318~320

   • C. M. Liu, T. H. Ko, T. L. Sung, W. Y. Chang, C. C. Chan, K. Ting, S. Teii, “Plasma Treatment of Polyethylene Surface by Using Amospheric Pressure Corona Torch”, The 4th Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Douliou, Yunlin, Taiwan, December 12~14, 2005, P.321~323

   • C. M. Liu, T. L. Sung, Y. H. Chan, W. L. Zeng, C. C. Chan, K. Ting, S. Teii, “Research of Microstructure and Properties on Titanium Implant with TiO2 Layer by Plasma Treatment”, The 4th Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Douliou, Yunlin, Taiwan, December 12~14, 2005, P.332~335

   • T. L. Sung, C. M. Liu, C. H. Haieh, C. H. Lin, K. Ting, S. Teii, “PCB De-smear Process by Using RF Discharge H2O Plasma”, The 4th Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Douliou, Yunlin, Taiwan, December 12~14, 2005, P.336~339

   • J. L. Lee, C. M. Liu, K. Ting, W. K.Cheng and S. Takizawa, S. Arase, S. Ono, S. Teii, “Plasma treatment of polyethylene surface for metallizing by using an atmospheric pressure corona torch”, The 3rd Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Taiwan, December 13~15, 2003, p.237~242

   • J. L. Lee, C. M. Liu, K. Ting, W. K. Cheng and T. Tsuchida, K. Hiramatsu, S. Ono, S. Teii, “The modification of polyethylene surface by plasma treatment for metallizing using a low pressure RF discharge plasma”, The 3rd Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Taiwan, December 13~15, 2003, p.243~247

   • Chao-Chen Yang, Chung-Ming Liu, Young-Chin Chen, Hsing-Nan Chung and Meng-Hsun Liu, “The Study of Plasma Surface Treatment Technology and its Application on Woven Fabric”, The 3rd Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Taiwan, December 13~15, 2003, p.252~257

   • Chao-Chen Yang, Min-Fong Shu, Chung-Ming Liu, Te-Ho Wu, “Radiofrequency and/or Direct-Current Magnetron Sputtering Fabricating Magnetic Films of Gd-Co-Fe from Plasma Applications”, The 3rd Asia-Pacific International Symposium on the basics and Applications of Plasma Science and Technology, Taiwan, December 13~15, 2003, p.258~264

   • Yoshinari Komatsu, Chungming Liu, Shoji Goto, Setsuo Aso, “High-temperature strength of 25 mass% chromium Fully-eutectic White Cast Irons”, The 1st Korea-Japan Confrence for Young Foundry Engineers, Korea Jeju, April, 2003, P17~20.

   • Tzu Hsiang Co, C. M. Liu and H. K. Chen, “Numerical Study on Three-Dimensional Isothermal Solid-gas Flow and Deposition Process in a Plasma Spray Torch with Different Solid Shield Diffusive Angle”, 中國機械工程學會第二十一屆全國學術研討會, 高雄‧臺灣, Nov, 2004.

   • Tzu H. C. , C. M. Liu and A. Z. Lin, Y. Matsuo, S. Ono, S. Teii, Numerical and Experimental of a pen-like Atmospheric Plasma Torch, IEE Japan, toyama Japan, 11,18~19, 2004, PST-4-83~95.

   • Yoshinari Komatsu, Chungming Liu, Shoji Goto, Setsuo Aso and Youn-Che Kim, “Deformation Microstructue of 25mass% Chromium Fully-eutectic White Cast Iro”n, 2nd Japan -Korea Workshop for Young Foundry Engineers, Jeju Island , Korea, July 6~9, 2005, P.29~31

   • Shoji Goto, Chumgming liu, Setsuo Aso, Yoshinari, Komatsu, “Strengthening Mechanism of Directionally Solidified 25mass% Chromium Fully-eutectic White Cast Iron”, International Conference on Materials Engineering for Resources(ICMR2005), Akita City, Japan, October 20~22, P.371~375 （大會優秀論文獎）

   • C. M. Liu, W. K. Chen, K. H. Yang, M. D. Ger, “Study of Vanadate Anodizing Bath of AZ61 Magnesium Alloy for Corrosion”, International Conference on Materials Engineering for Resources(ICMR2005), Akita City, Japan, October 20~22, P.480~484

   • W. K. Chen, J. L. Lee, C. M. Liu, J. Y. Wang, M. D. Ger, “The Electrochemical Corrosion Properties of Anodic Film on Magnesium Alloy Lz91 by Pulse Method”, The 2004 Annual Conference of the Chinese Society for Material Science, Taiwan, Nov., 2004

   • 程偉、劉沖明、李九龍、葛明德、楊光絢, 鎂鋰合金(LZ91)陽極處理之研究, 第四屆海峽兩岸材料腐蝕及防護研討會, Taipei, Taiwan, January, 24, 2005

   • 程偉、劉沖明、王建義、文念慈、葛明德, 鎂鋰合金(LZ91)陽極磨耐蝕性能與微觀結構, 鎂合金產業通訊, 第30期, 2005, 8, P.33~39

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1997,10，高Cr白鑄鐵的高溫強度及變形機構，日本鑄造工學會第131次全國演講大會，演講概要集,P.50。

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1998,5，高Cr白鑄鐵的高溫因凝固速度速度的影響，日本鑄造工學會第132 次全國演講大會，演講概要集,P.99

   • Chungming Liu, Setsuo Aso, Shoji Goto, Yoshinari Komatsu Mechanical, October, 1998,Mechanical Properties of Chromium White Cast Irons at High Temperatures, The Third International Conference on Materials Engineering for Resources, Akita, Japan, P.175~176.

   • Chungming Liu, Setsuo Aso, Shoji Goto, Yoshinari Komatsu Mechanical, October, 1998, Though Hardening of As-Heat-Treated Cemented Carbides, The Third International Conference on Materials Engineering for Resources, Akita, Japan, P.177~178.

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1998,11，Fe-25%Cr-C三元系共晶合金對於凝固方向之壓縮強度的異方性，日本鑄造工學會第133次全國演講大會，演講概要集,P.46。

   • 劉沖明，麻生節夫、後藤正治，小松芳男，1998,11,單方向凝固之Fe-25%Cr-C三元系共晶合金之機械性質，日本鑄造工學會北海道，東北支部聯合部會研討會高Cr白鑄鐵部會資料， P.7-12。

   • 劉沖明，麻生節夫、後藤正治，小松芳男，高Cr白鑄鐵高溫嚇之壓縮強度的異方向性，日本鑄造工學會第134次全國演講大會，演講概要集1999,5,P.50。

   • Chungming Liu, Setsuo Aso, Shoji Goto, Yoshinari Komatsu Mechanical,Slurry Erosion Behavior of Fe-15mass%Cr-C-B alloys, Proceedings of the 5th Asian Foundry Congress, Nanjing, China, Sept., 1997, 276~284.

   • 劉沖明、麻生節夫、後藤正治、小松芳男, 對於高溫下之高Cr白鑄鐵壓縮強度的異方性，日本素材物性學會平成11年年會，演講概要集1999,6,P.64-67。

   • Shoji Goto, Chungming Liu, Setsuo Aso, Yoshinari Komats, 2001, April, High-temperature Strength of Unidirectionally Solidified Fe-Cr-C Eutectic Alloys, 9th International Conference on Creep and Fracture of Engineering Materials and Structures, university of Wales Swansea, UK, p. 515~524.

   • Shoji Goto, Chungming Liu, Setsuo Aso, Yoshinari Komatsu, JAPAN, 2001, June, Mechanical Properties of Eutectic Fe-Cr-C Composite Alloys, The Seventh International Conference of creep and Fatigue at Elevated Temperatures, National Research Institute of Metals (NRIM), Tsukuba,P.261~266.

3. 建教合作與計劃

   計畫名稱	計畫內擔任之工作	起迄年月	補助或委託機構	執行情形	政府機構補助款	民間企業配合款	總計
   脈衝電漿廢水處理系統	主持人	2007/05/01~2008/04/30	國科會	執行中	330,000	120,000	450,000
   奈米陶瓷與生醫用合金之界面整合性研究	主持人	2007/01/01~2007/11/30	龍華科技大學	執行中	80,000	85,000	165,000
   鎂合金微弧陽極處理之設備開發	主持人	2006/05/01~2007/04/30	國科會	完成	356,000	120,000	476,000
   三價鉻電鍍系統開發之研究	主持人	2005/12/01~ 2006/11/30	龍華科技大學	完成	280,000	50,000	330,000
   應用電漿離子氮化進行主機板鑽針不銹鋼把柄之表面改質	主持人	2005/05/01~ 2006/04/30	國科會	完成	419,000	216,000	635,000
   利用電漿於醫院廢棄物處理之應用	主持人	2005/08/01~ 2005/11/30	龍華科技大學	完成	200,000	120,000	320,000
   輕金屬表面改質微結構之研究	主持人	2005/08/01~ 2005/11/30	龍華科技大學	完成	80,000	40,000	120,000
   高分子材料之分解與再合成PLC控制系統設計	主持人	2005/08/01~ 2005/11/30	龍華科技大學	完成	80,000	40,000	120,000
   奈米鑽石膜微放電電極於電漿電視之應用	共同主持人	2005/08/01~ 2006/07/31	國科會	完成	371,000	0	371,000
   國際電漿應用技術交流合作計畫	共同主持人	2005/01/01~2005/12/31	教育部技職司	完成	0	0	0
   陣列型筆式大氣電漿炬數值模擬研究		2004/08/01~2005/07/31	國科會	完成	0	0	0
   國際電漿技術交流合作計畫	共同主持人	2004/03/01~2004/12/31	教育部技職司	完成	0	0